Yealink T41P

1. Installing your phone.

Connect your phone's Internet port to the network by using Ethernet cable.

2. Launch a web browser on a computer that can reach the VoIP-phone on the network. 

3. Direct the browser to the IP address of the VoIP-phone.

Note

To determine the IP address press OK button on the phone when the phone is idle. 

4. If DHCP is disabled in your network, you can enter static IP in phone menu:

Menu | Settings | Advanced Settings (password: admin) | Network | Wan port. 

Also you can request for network settings to your system administrator.

5. Enter the IP address in your web browser address bar. There will be opened the phone configuration page. 

Enter login and password (default is admin).  

In Status tab you can see basic information about device.

6. Click the Account tab in top menu and click Register in left menu.

Register Name: Enter your SIP ID from registration mail

Username: Enter your SIP ID from registration mail

Password: Password from registration mail

Transport: UDP

Server Host: Enter SIP proxy domain address 

Server Expires: 120

Click button Confirm at the bottom to save your settings.

7. Click Advanced in left menu.

Select "Default" in field Keep Alive Type.

8. Click Codec in left menu.

Please set turned on only codecs PCMA (G711a) and G729.

Click button Confirm at the bottom to save your settings.

Your VoIP-phone is ready to use!